Description
Steris Medivators DSD-201 Features:
- Fast cycle time for quick endoscope turnaround.
- Two basins for simultaneous or independent cycles.
- Continuous monitoring of cycle parameters.
- Leak test ensures endoscope protection throughout the cycle.
- Automated alcohol flush and air dry.
- Audible and visual alarms for reprocessing cycle deficiency.
- Assures patient and operator safety.
- Customizable cycle options to meet specific reprocessing needs.
Steris Medivators DSD-201 Specifications:
- Dimensions:
- Chassis Dimensions (HxWxD): 46” x 36” x 21” (117 x 91 x 53 cm)
- Height with lid open: 64 inches (162.5 cm)
- Weight: 400 lbs (181 kg)
- Operating Conditions:
- Altitude: <15,000 feet (4,572 m)
- Humidity: 20% to 80%, non-condensing
- Temperature: 80°F ± 20° (27°C ± 10°)
- Electrical Requirements:
- 230 VAC 50/60 Hz, 6A 1f
- 120 VAC 60 Hz, 12A 1f
- Water Requirements:
- Potable water from the building (cold water supply).
- 35-40 psi (2.4 – 2.75 bar) at regulator.
- Maximum water temperature: 110°F (43°C)
- Capacities:
- Disinfectant reservoir: 15 liters
- Basin: 11 liters
- Alcohol and detergent reservoir: 800 ml each
- General:
- Power Cord: Hospital-grade 8 feet (2.4 m)
- Mains Supply Voltage Fluctuations: Not to exceed ±10% of the nominal voltage Installation Over Voltage Category: II
- Classification: I, Ordinary Protection
- Rinse Water Consumption: Approx. 10 gallons (39 liters) per cycle
- Designed for Use: Indoor
- Environmental Rating: Standard
- Pollution Degree: 2
- Mode of Operation: Continuous
- Degree of Mobility: Stationary
- Waste Drain: The reprocessor drain is 25 inches (60 cm) above the floor. Because the reprocessor uses a gravity system, there must be at least a 3-inch (25 mm) drop from the reprocessor over 36 inches (30 cm) for proper draining
- Disinfectant Compatibilities: Contact your local distributor for compatible reprocessing chemicals
- Internal Heater: Ambient temperature to 125°F (52°C)
