Nellcor N 600
Description
Nellcor N-600 Features:
- Full-featured oximeter for monitoring neonates, pediatrics, and adults.
- Large LED digital display for easy readings of SpO2 and pulse rate measurements.
- Incorporates Nellcor SatSeconds alarm technology for customizable visual and audible alarms.
- Stores up to 48 hours of trending data at 4-second intervals or 24 hours of 2-second trending data.
- Can be used as a standalone device or connected to other equipment.
- User-selectable fast-averaging mode for precise tracking of rapidly changing saturations.
- Backup speaker with escalating alarm tones.
- Interfaces with certain multi-parameter monitors to display real-time patient information and physiologic waveforms.
Nellcor N-600 Specifications:
- Dimensions:
- Height: 4.1 in (104mm)
- Width: 11.9 in (302mm)
- Depth: 10.1 in (257mm)
- Weight:
- 13 lbs (6kg)
- Display Type:
- Vacuum fluorescent & LEDs
- Display area: 140.6mm x 35mm
- Resolution: 256 x 64 pixels
- Pixel size: 0.4 x 0.4 mm
- Controls and Indicators:
- Front panel: on/standby, freeze, menu, pulse tone volume, up and down, alarm off, battery charging indicator, function keys (4), software configured
- Rear panel: mains AC power ON/OFF control
- Connections:
- Front panel: connector for mainstream CO2 sensor cable, connector for SpO2 cable
- Rear panel: power cord receptacle, fuse block, RS-232 input/output port, C-lock ECG synchronization input (3/32” mono phone jack)
- Capnograph Display Range:
- 0-99 mmHg
- Breath rate: 0-150 breaths/min
- Pulse Oximeter Display Ranges:
- SpO2: 0-100%
- Pulse rate: 20-250 beats per minute (bpm)
- Electrical Power Requirements:
- 100/120V ~, 50/60 Hz, 500 mA; 220/240V ~, 50/60 Hz, 250 mA
- Digital/Analog input voltage: ±30 VDC, maximum
- Battery:
- Type: Sealed lead acid
- Operating time (fully charged): 90 min nominal, 180 min without graphics
- Recharge period: 12 hrs typical
- AC Fuses:
- 100/120 V ~: 1 XT 1.0 A, 250V, 3AG
- 220/240 V ~: 2 XT 0.5 A, 250V, 3AG
