GE CARESCAPE Patient Data Module

Single Product Request Form
Category

Description

Features:

  1. Base Hemodynamic Parameter Module: The Patient Data Module (PDM) serves as the foundational module for hemodynamic parameters. It is available with Ohmeda, Nellcor, or Masimo SpO2 technology and with or without IBP (Invasive Blood Pressure) capabilities. The PDM saves all measured data independently, regardless of the source.
  2. Comprehensive Parameter Measurement: The PDM can measure various parameters, including ECG (3L/5L/6L/12L), continuous arrhythmia analysis (4L), CO (Cardiac Output), SpO2 (Oxygen Saturation), up to 4 IBP, and 2 temperatures. It utilizes advanced technology for noninvasive blood pressure measurements, such as the GE Dinamap algorithm.
  3. Trend Data Capture: Throughout the transfer process, the Patient Data Module captures trend data, ensuring that providers have access to critical information at every touchpoint. This feature facilitates fast response to critical events and supports continuity of monitoring during patient transport.
  4. Power Backup for Transport: To maintain monitoring continuity during transport, the Patient Data Module can power the Transport Pro® device in case of low or missing battery conditions. This ensures that patient monitoring remains uninterrupted, even in challenging situations.
  5. Improved Patient Throughput: By providing flexibility in patient movement to the most appropriate care areas based on their needs, the Patient Data Module can help improve patient throughput and cost-efficiency within healthcare facilities.

GE CARESCAPE Patient Data Module Specifications:

  • Dimensions:
    • Height: 2.75 in (7 cm)
    • Width: 5.75 in (14.6 cm)
    • Depth: 8.5 in (21.6 cm)
    • Weight: 1.1 kg (2.4 lb) without battery, 1.3 kg (2.9 lb) with battery
  • Batteries:
    • Type: Removable lithium-ion
    • Quantity: One
    • Voltage: 11.1 Volt (nominal)
    • Capacity: 1.8 Amp hour (nominal)
    • Charge time: Approximately 2.5 hours
    • Run time: Approximately 1.5 hours (new, fully charged)
    • Battery Life: 300 cycles to 60% capacity
  • Operating Conditions:
    • Heat Dissipation: 15.36 BTU/hour
    • Temperature: 10ºC to 35ºC (50ºF to 95ºF)
    • Relative Humidity: 15% to 95% (non-condensing)
  • Storage Conditions:
    • Temperature: -40ºC to 60ºC (-40ºF to 140ºF)
    • Relative Humidity: 15% to 95% (non-condensing)
  • ECG:
    • Standard Leads Available: I, II, III, V1 to V6, aVR, aVL, and aVF
    • Leads Analyzed Simultaneously: Twelve (I, II, III, V1 to V6, aVR, aVL, and aVF)
    • Lead Fail Detection: Identifies failed electrodes and switches to intact ones
    • Lead Fail to Sense Current: Active electrodes: < 30 nA each, referenced electrode < 270 nA

 

Related products